Grades :
Monel 400, Monel k500
Type:
Seamless / Erw / Welded/ Fabricated
Form:
Round, Square, Rectangular, Hydraulic etc.
Length:
Single Random, Double Random & Cut Length
End:
Plain End, Beveled End, Threaded
The salient features are as follows :
Hot Dipped Galvanizing
Epoxy & Fbe Coating
Electro Polish
Draw & Expansion
| Designation | C% | Co% | Cr% | Mo% | Ni% | V% | W% | Ai% | Cu% | Nb/Cb Ta% | Ti% | Fe% | Sonstige Autres-Other % |
| Monel 400 | 0.12 | - | - | - | 65.0 | - | - | - | 32.0 | - | - | 1.5 | Mn 1.0 |
| Monel 401 | 0.10 | - | - | - | 43.0 | - | - | - | 53.0 | - | - | 0.75 | Si 0.25; Mn 2.25 |
| Monel 404 | 0.15 | - | 52.0-57.0 | - | - | 0.05 | rest/bal | - | - | 0.50 | Mn 0.10; Si 0.10;S o.024 | ||
| Monel 502 | 0.10 | - | - | - | 63.0-17.0 | - | - | 2.5-3.5 | rest/bal | - | 0.50 | 2.0 | Mn 1.5;Si 0.5; S 0.010 |
| Monel K 500 | 0.13 | - | - | - | 64.0 | - | - | 2.8 | 30.0 | - | 0.6 | 1.0 | Mn 0.8 |
| Monel R 405 | 0.15 | - | - | - | 66.0 | - | - | - | 31.0 | - | - | 1.2 | Mn 1.0; S 0.04 |
| Tensile strength, Ultimate | 550 Mpa |
| Tensile strength, Yield | 240 Mpa |
| Elongation at Break | 48% |
